Basically, the loudspeaker system will start saving power as soon as work is interrupted.Īdditionally an ‘ISS Disable’ switch is located on each product’s back plate next to the other room response controls. When an input signal is detected, the loudspeaker immediately turns itself on. If the ISS circuit does not find any audio on the input for a period of time, it sets the loudspeaker to a low-power sleep state and the loudspeaker will consume less than 0.5 watts. The Intelligent Signal Sensing, ISS™ circuitry tracks the signal input of the loudspeaker and detects if it is in use. Introduced early 2013, Genelec’s Intelligent Signal-Sensing technology has been developed to meet with both European Union ErP Directives and the company’s own wider sustainability commitments. Intelligent Signal Sensing (ISS™) for power consumption reduction in stand-by mode. Increased system maximum sound pressure level capacity.Increased drive unit sensitivity up to 6 dB.Improved stereo and sound stage imaging.Increased direct-to-reflected sound ratio for reduced control room coloration.Flat on- and off-axis response for wider usable listening area.This accommodates not only the engineer doing his or her job, but also others in the listening field, as is so often the case in large control rooms. Sound image width and depth, critical components in any listening environment, are important not only for on-axis listening, but also off-axis. As a consequence, the monitoring system's performance is less dependent on room acoustic characteristics. Minimized early reflections and controlled, constant directivity have another important advantage: the frequency balance of the room reverberation field is essentially the same as the direct field from the monitors. This advanced DCW technology minimizes early reflections and provides a wide and controlled listening area achieving accurate sound reproduction on- and off-axis. It results in excellent flatness of the overall frequency response as well as uniform power response. To make the directivity uniform and smooth, the goal is to limit the radiation angle so that the stray radiation is reduced.
The DCW technology shapes the emitted wavefront in a controlled way, allowing predictable tailoring of the directivity (dispersion) pattern. The Genelec DCW technology developed and refined over more than 30 years greatly improves the performance of direct radiating multi-way monitors. The end result is a simpler, more reliable, efficient, consistent and precise active loudspeaker system.ĭirectivity Control Waveguide (DCW™) for flat on- and off-axis response.Ī revolutionary approach was taken by Genelec in 1983 with the development of its Directivity Control Waveguide (DCW™) used at the time in an egg-shaped enclosure.
#Deezer land full
Using the active approach enables frequency response adjustments and optimization of the full loudspeaker system, placed in various room environments, without expensive external equalizers.
#Deezer land driver
The flat frequency response of a high-quality active loudspeaker is a result of the combined effect of the crossover filter response, power amplifier responses and driver responses in a loudspeaker enclosure.The possibility to compensate for the frequency and phase response anomalies associated with a driver’s characteristics within the intended pass-band.The ability to compensate for sensitivity variations between drivers.This isolates each driver from the drive signals handled by the other drivers, reducing inter-modulation distortion and overdriving problems. Each driver has its own signal processing and power amplifier.
#Deezer land drivers
Genelec digital active crossovers include additional signal processing, such as driver protection, delay, and equalization. Active crossover operating at low signal levels.Īudio electronic crossovers allow to split the audio signal into separate frequency bands that can be separately routed to individual power amplifiers which then are connected to specific transducers optimized for a particular frequency band.Īctive crossovers come in both digital and analogue varieties.
0 kommentar(er)
